Click image to view full size image
Description:
Woodworking Machinery R6A Automatic Edge Banding Machine/ EdgeBander1.Premilling function;
2.Corner chamfering function
Woodworking Machinery R6A AutomaticEdge Banding Machine/ EdgeBander
1. Main working process: pre-milling, gluing, end trimming, roughfinishing, fine finishing, corner rounding, scraping,polishing
2. Application: Thismachine is mainly used for the straight edge banding of MDF, SolidWood Boards and Shaving Board. It very applies to the manufacturers whoproduce paneltype furniture.
(1) The straight wooden bar doesn’t need to cut, the PVC band needto cut.
(2) Main material of edge band: PVC , thin board(veneer), curledbelt, timber.
(3) The edging trimming system of this machine is used for trimmingthe upside and downside unwanted material.
(4)The system adopts high frequency motor and profiling copystructure, and pledge the cutting surface smooth.
(5)The profiling has been adjusted precisely before leave factory.But in the working process, it will adjust such parts as thespecification and the nature of the material willchange.
(6)The polishing system of this machine is used for buffing theprocessed boards. The polishing parts are made up of two motorswith cotton polishing wheel. They polish the enveloping belt upsideand downside separately.
(7)During the working process, the following parts will beadjusted.
3. Technicalspecifications
| Edgewidth | 15-55mm |
| Edge thickness | 15mm |
| Coiled materialthickness | 3mm |
| Panel thickness | 10-60mm |
| Min.panel width | 80mm |
| Min.panel length | 160mm |
| Feeding power | 1.5kw |
| Feeding speed | 11m/min |
4. Photos
Pre-millingPart
CornerChamfering Part
Automatic Edge Banding Machinery
